Characteristics of a variable spaced planar thermionic converter with a tungsten emitter and a niobium collector

Current-voltage characteristics of variable spaced thermionic converter with tungsten emitter and niobium collecto

A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties

The hardened ordinary Portland cement (OPC) surface layer of concrete which was glazed using a CO2 and a high power diode laser (see Part I of this paper) has been tested in order to determine the mechanical, chemical and physical characteristics of the glazes. The work showed that the generation of the surface glazes resulted in improved mechanical, chemical and physical properties over the untreated OPC surface of concrete. However, differences in the performance of the CO2 and HPDL generated glazes were observed. These are believed to be due to the differences in the morphology and microstructure of the glazes generated as a result of the differing beam absorption characteristics of the two lasers. Life assessment testing revealed that the laser glazed OPC surfaces effected an increase in actual wear life of 1.3 to 17.7 times over the untreated OPC surface of concrete depending upon the corrosive environment

Encouraging practitioners in infection prevention and control to publish: a cross-sectional survey

Aim: The aim of this cross-sectional survey was to determine the views of infection prevention and control practitioners (IPCPs) on publishing research. Methods: A convenience sample was obtained by approaching delegates at the 2015 Infection Prevention Society conference and data was captured via a hand-held electronic device. Findings: Of the 79 respondents most (83%) read Journal of Infection Prevention (JIP) and found it useful for informing their practice (72%). However, most (91%) had never published in JIP, and less than half (40%) published elsewhere. The main barrier to publication was not having work suitable for publication (38%). Support (37%), training in writing for publication (10%) and time (9%) were considered to be important facilitators in encouraging respondents to publish. Discussion: Strategies that support IPCPs in developing their writing skills may encourage more IPCPs to disseminate evidence to support best practice by publishing their work in peer reviewed journals

An optical model description of momentum transfer in heavy ion collisions

An optical model description of momentum transfer in relativistic heavy ion collisions, based upon composite particle multiple scattering theory, is presented. The imaginary component of the complex momentum transfer, which comes from the absorptive part of the optical potential, is identified as the longitudinal momentum downshift of the projectile. Predictions of fragment momentum distribution observables are made and compared with experimental data. Use of the model as a tool for estimating collision impact parameters is discussed

Wind measurement system

A system for remotely measuring vertical and horizontal winds present in discrete volumes of air at selected locations above the ground is described. A laser beam is optically focused in range by a telescope, and the output beam is conically scanned at an angle about a vertical axis. The backscatter, or reflected light, from the ambient particulates in a volume of air, the focal volume, is detected for shifts in wavelength, and from these, horizontal and vertical wind components are computed

Economic Analysis of Increased Levels of Intramuscular Fat in Pork: Producer and Industry Opportunities

Ultrasound technology is available for accurately measuring intramuscular fat (IMF) in live pigs. This report provides information on the costs for pig producers and processors to implement this technology and what consumers are willing to pay for pork with improved levels of intramuscular fat. About half the participants in the willingness to pay study preferred the high IMF chop. They paid a premium of 25 percent over the low IMF chop.ultrasound technology, measure intramuscular fat live pigs, pig producer cost, pig processor costs, consumer willingness to pay, Agribusiness, Agricultural and Food Policy, Consumer/Household Economics, Demand and Price Analysis, Farm Management, Food Consumption/Nutrition/Food Safety, Livestock Production/Industries, Marketing,

Solving Einstein's Equations With Dual Coordinate Frames

A method is introduced for solving Einstein's equations using two distinct coordinate systems. The coordinate basis vectors associated with one system are used to project out components of the metric and other fields, in analogy with the way fields are projected onto an orthonormal tetrad basis. These field components are then determined as functions of a second independent coordinate system. The transformation to the second coordinate system can be thought of as a mapping from the original ``inertial'' coordinate system to the computational domain. This dual-coordinate method is used to perform stable numerical evolutions of a black-hole spacetime using the generalized harmonic form of Einstein's equations in coordinates that rotate with respect to the inertial frame at infinity; such evolutions are found to be generically unstable using a single rotating coordinate frame. The dual-coordinate method is also used here to evolve binary black-hole spacetimes for several orbits. The great flexibility of this method allows comoving coordinates to be adjusted with a feedback control system that keeps the excision boundaries of the holes within their respective apparent horizons.Comment: Updated to agree with published versio